Thursday, October 24, 2019

Plumbing Grapevine TX Pro

https://www.facebook.com/Plumbing-Grapevine-TX-Pro-1386215251484893/

+Plumbing Grapevine TX ❤️✌️

{How to [Remove] a Shower Drain}

Part 1

Lubricating Your Shower Drain

1- Purchase a drain lubricant to loosen the bathe drain.

2- Check your drain for clogs before you loosen it.

3- Dry your shower drain before making use of the lubricant.

4- Coat the bathe drain in the lubricant.

Part 2

Unscrewing and Loosening the Drain

1- Check the bathe drain for screws.

2- Insert 2 nostril pliers into the drain openings.

3- Grab the plier handles firmly with both hands.

4- Continue twisting the drain until it is entirely loosened.

Part 3

Lifting the Shower Drain Out

1- Grasp each of your pliers firmly and carry the shower drain out of the hole.

2- Keep your grip consistent as you raise the drain out.

3- Inspect the drain after removal.

4- Replace the drain if you cannot repair it.

Business Name : Plumbing Grapevine TX Pro

Phone : 817-618-0452

 
 

Tuesday, October 1, 2019

Plumbing Grapevine TX Pro

https://www.facebook.com/Plumbing-Grapevine-TX-Pro-1386215251484893/?ref=page_internal

1 - Turn off the power source to your garbage disposal. This is the most important step of the process, as the failure to turn it off could result in serious injury. Never stick your hand into the garbage disposal.

  • If your garbage disposal is plugged in underneath your sink, you can turn it off by unplugging it from the wall.

  • If you don't see where it's plugged in, you may have to turn the power off to the garbage disposal on your breaker panel.

2 - Use a plunger to remove the water from the sink. Cover the entire drain with the plunger and give it a few pulls. Remove it and see if any of the water and clogged items begin to drain.

3 - Use pliers to remove clogged items. Insert the pliers into the drain to pull out whatever might be clogging it. A utensil like tongs would work as well.

  • If the water begins to drain as you're pulling materials out, this was likely the cause of the clog.

  • You might want to wear rubber gloves during this step, depending on how high the Standing Water is

4 - Plug your garbage disposal back in. This will ensure that the clogged item was the source of the problem. Once it is plugged in, run the faucet and then turn the garbage disposal back on for several seconds.

  • If the garbage disposal makes the sound that it normally does and water does not collect in the sink, then you have fixed the problem.

  • If the sink fills with water again, you may have clogged grinding mechanisms in your garbage disposal or a clogged drain.

817-618-0452

Location Services :

Plumbing Grapevine TX

  + Plumbing Grapevine TX https://plumbinggrapevinetx.com/ 817-618-0452 6 Signs That Your Water Heater Needs Replacement 1- How old a ...